Hive beetle War strategies

As of today I have two excellent strong hives of honey bees left.  Besides being strong hives, they are gentle as can be and a pleasure to be around.  And that's something I want to continue.  Because once they get overrun with varroa and hive beetles that can change.

Secure base.  Nothing gets in except fresh air

Slides into base (lubricated with beeswax of course)

The first thing I did was completely caulk all new frames in the hives to allow no crevices where hive beetles can hang out.  Plus that saves the bees time and energy so they won't have to fill these areas with propolis.  Several members of the Pinellas beekeeping group had some innovative ideas how their hive bottoms and covers were modified to add ventilation and close off areas where hive beetles hide out.  The hive bottom boards were screened but under the screens they had trays that could hold either diatomaceous earth  OR oil.  Both have their advantages and disadvantages.  I decided to start off with the diatomaceous earth which is fatal to hive beetles ... especially their larvae.  Oil is a bit messy and you may end up with low spots due to the angle of the hives not being completely level.

sliding bottom board pan for oil or diatomaceous earth

fine mesh screen vent in the bottom board promotes cool bees

So now the bottom of the hive has closed off access to hive beetles while still retaining a fine screened ventilation slot.  Plus the pan of diatomaceous earth to catch hive beetles being pushed out by the bees.

Modified inner hive cover

Fine aluminum screen - Nothing gets in but fresh air from the cover

The top covers of the hives also have major modifications.  Besides extra venting, the bottom of the inner covers are completely screened with fine mesh to keep out any hive beetles (or other pests like wax moths, etc.).  They may get into the upper chamber but it's impossible for them to get in where the bees are.  And I think this will be a major help because above inner hive covers is where these nasty beetles love to hide out and plot their strategies to lay eggs in the brood chamber infecting the baby bee larvae.

The final method of hive beetle control is one I've mentioned in previous posts.  And that's adding an entrance reducer.  This gives the beetles a limited area to gain access to the hive.  With a couple hundred bees hanging out by the entrance keeping watch this really limits the options for hive beetles sneaking in.

Adding beeswax to honey super frames

I'm happy to report that the bee farm bees were ready for a honey super so some beeswax was melted in the slow cooker we got at a resale shop and then applied to medium frames.  I used a foam brush to apply the wax which was somewhat clumsy.  Need to refine this technique somewhat.  Also tried a mini roller which might work better.  A constant learning process for sure.  Fun fun fun

Into the hives and guess what?

Today was inspection day for the bee farm hives.  All four hives were opened up and examined.  In particular I was anxious to look at the smallest colony that was from the swarm that split.  Not as many bees as all the others so I had to determine if there was a queen.  Sure enough when the hive was opened, the numbers were not great but ok.  Two to three strong frames being worked on.  And as hard as I looked, there was no queen to be found.  The good news was I found active brood and what appeared to be queen cells midway up one of the frames.  We have many dragonflies in this area and dragonflies love to eat bees.  Maybe the queen went out to find a boyfriend and got eaten by a dragonfly. 

The two original hives (from the Nuc's I purchased) were going strong and the honey supers on top were already half filled.  What this means is I better get to work building more supers and frames.  Because these will soon be filled and need more supers stacked on top.  The last swarm colony looked quite healthy.  Only hive Beatles were found in one of the original hives from the Nucs.  I placed beetle traps in them.

After examining 60 frames it was time for a rest.  I still struggled with keeping the smoker lit but will get it right eventually.   All in all it was a good inspection and took a good portion of the morning.   The colony in our front yard won't be opened for a couple more weeks.

Last night frames and bases were built.  This seems to be a never ending fun project.  Deeps, mediums, more frames and inner and outer covers need to be constructed this week.  I can't imagine doing this and having to buy everything instead of building it yourself. 

Here's the guess what from the title ... I was on the side of our house and noticed a lot of bees around where the swarm traps were stacked on top of each other (with no bait scent).  A lot of activity was around the one in the middle so I removed the cover and couldn't believe how many bees were inside.  A bunch flew out at me buzzing around.  Quite amusing so I put a couple frames in the box for them to start building comb.  Why not?  What's so funny is they're only a few feet away from the noisy air conditioner.  Is this swarm 6?  Not sure yet.  I'll check back in a couple days.